Canon EOS 250D, Руководство для продвинутых пользователей

Страница: 156 / 495

156
5
Set the exposure and take the
picture.
z
Check the exposure level indicator
and set the desired shutter speed and
aperture.
z
If the exposure level exceeds ±2 stops
from the standard exposure, the end of
the exposure level indicator will display
<
I
> or <
J
> in the viewfinder. (On the
LCD monitor, if the exposure level
exceeds ±3 stops, <
I
> or <
J
> will be
displayed.)
z
The set exposure setting will not be maintained for movie shooting.
Exposure Compensation with ISO Auto
If the ISO speed is set to [AUTO] for manual exposure shooting, you can
set exposure compensation (
=
160) as follows:
z
[
z
: Expo.comp./AEB]
z
[5:Expo comp (hold btn, turn
S
)] with [Assign SET button] under
[
5
: Custom Functions(C.Fn)]
(
=
452)
z
Quick Control ( = 57)
z
If ISO Auto is set, the ISO speed setting will change to obtain the standard
exposure with the set shutter speed and aperture. Therefore, you may
not obtain the desired exposure effect. In such a case, set the exposure
compensation.
z
If flash is used when ISO Auto is set, exposure compensation will not be
applied even if an exposure compensation amount is set.
z
Under [
z
: Auto Lighting Optimizer] , if the checkmark [
X
] for [Disable
during man expo] is removed, Auto Lighting Optimizer can be set even in
the <
a
> mode ( = 136 ).
z
When ISO Auto is set, you can press the <
A
> button to lock the ISO speed.
z
If you press the <
A
> button and recompose the shot, you can see the
exposure level difference on the exposure level indicator compared to when
the <
A
> button was pressed.
z
If exposure compensation ( = 160) was applied in <
d
>, <
s
>, or <
f
>
mode, the exposure compensation amount already set will still be maintained
when the shooting mode is switched to <
a
> with ISO Auto set.