234
Connecting the camera to a TV set is recommended to play back the
shot movies (p.333-335).
When the shooting mode is set to any mode other than <
a
>,
autoexposure control will take effect to suit the scene’s current brightness.
1
Set the power switch to <
k
>.
X
The reflex mirror will make a sound,
then the image will appear on the
LCD monitor.
2
Set the Mode Dial to a mode other
than <
8
>, <
v
>, or <
a
>.
3
Focus on the subject.
Before shooting a movie, focus with
AF or manual focus (p.214-223, 228).
By default, [
Movie Servo AF:
Enable
] is set so that the camera
always keeps focusing. To stop Movie
Servo AF, see page 273.
4
Shoot the movie.
Press the <
A
> button to start
shooting a movie. To stop movie
shooting, press the <
A
> button
again.
X
While the movie is being shot, the
“
o
” mark will be displayed on the
upper right of the screen.
X
Sound will be recorded by the built-in
microphones.
k
Shooting Movies
Autoexposure Shooting
Recording movie
Built-in microphones