Canon EOS-1 D X Mark II G, Инструкция по эксплуатации

Страница: 155 / 562

155
You can set the image size (number of recorded pixels for JPEG/RAW)
and JPEG quality (compression rate).
JPEG is indicated by
3
,
K
,
5
, and
6
, and RAW is
1
,
41
, and
61
. After shooting, you can process RAW images with Digital Photo
Professional (EOS software, p.550). Note that
1
images can also be
processed with the camera (p.392).
You can set the image size in one of the two ways below.
Using the Rear LCD Panel to Select the Image Size
1
Press the <
H
> button
(
9
)
.
2
Select the desired image size.
Turn the <
5
> dial to select the
image size.
If
1
/
41
/
61
and
3
/
K
/
5
/
6
are displayed at the same time, the
RAW and JPEG images will be
recorded simultaneously to the card.
Turn the <
6
> dial to select the card
to record or play back images
(p.154).
Setting the Image-Recording Quality
H
Selecting the Image Size
When [ Record func. ] is set to [ Rec. separately ] (p.153), turn the <
6
>
dial to select a card and set the image size for the respective card.
In this manual, the image size and JPEG quality (p.162) are specified as
the image-recording quality.