![background image](http://html.mh-extra.com/html/canon/ef-9/ef-9_service-manual_62296042.webp)
IV. MALFUNCTION TROUBLESHOOTING
IV-1
No power supply
<Possible causes>
1. The envelope feeder is not installed in the printer properly.
Action:
Re-install the envelope feeder into the printer properly.
2. Poor contact in the +24V supply line connector
Action:
Reconnect the connector J931 on the envelope feeder driver PCB correctly.
3. Defective envelope feeder driver PCB
Action:
Replace the envelope feeder driver PCB.
IV-2
Pick-up motor failure
<Possible causes>
1. Poor contact in the pick-up motor drive signal line connector
Action:
Reconnect the connector J932 on the envelope feeder driver PCB correctly.
2. Defective pick-up motor
Action:
Replace the pick-up motor.
3. Defective envelope feeder driver PCB.
Action:
Replace the envelope feeder driver PCB.
4 - 6
CHAPTER 4
Содержание EF-9
