Canon DU7-1178-000 Скачать руководство пользователя страница 119

Страница: 119 / 122

Chapter 4

4-1

4.1 Related Service Mode

4.1.1 Invalidating the License for Transfer to a Different Device (Level 2)

0010-4610

Service Mode Item Used to Invalidate a License for Transfer to a Different Device (Level 2)

Possible Situation

A license may be used on a different device through transfer, as when replacing the device at the end of a

lease agreement. To do so, the user must first invalidate the existing license by performing a set of steps

referred to as "invalidation of a license" using service mode. At times, both source and target of transfer

may be the same device, and a license therefore may also be invalidated only temporarily. It is important

to note that the user must contact the Sales Company to make a license good regardless of whether it has

been invalidated intentionally or inadvertently.

Invalidation Procedure

Invalidation consists in invalidating the license in service mode and generating an invalidation certificate

that proves the completion of invalidation. Invalidation may take place for individual optional functions,

and a specific function becomes no longer available as soon as an invalidation certificate is issued. The

user contacts the Sales Company and provides the following: the invalidation certificate, the device serial

number of the source of transfer, the device serial number of the target of transfer, reason of transfer. In

response, the Sales Company may issue a license key for new installation on a different device. The user

must take note of the new license key in writing, and keep it as a record after registering it to the target

device.

Installation Procedure

1. Start service mode, and activate Level 2 so that the following is true:

COPIER>OPTION>LCNS-TR

The following screen appears, showing the current status of various options:

F-4-1

Содержание DU7-1178-000



























































































































Результаты поиска

Содержание DU7-1178-000

Отзывы:

Canon DU7-1178-000, Руководство по обслуживанию, Страница: 119 / 122

Результаты поиска

Содержание DU7-1178-000

Отзывы: