Canon DU7-1178-000 Скачать руководство пользователя страница 109

Страница: 109 / 122

Chapter 1

1-5

OCR Engine

- The OCR engine is one that comes with imageWARE products.

rate of character recognition:

98% (approx.)

recognized font:

Helvetica, Courier New, Times New Roman

recognized font size:

6 to 72 pt

limitations:

130 characters per lines (100 lines max.)

Normal operation confirmation language:

-Japanese - English

-French - Italian

-German - Spanish

-Portuguese - Dutch

-Norwegian - Danish

-Finnish - Swedish

-Slovene - Czech

-Hungarian - Polish

-Russian - Estonian

-Greek - Slovakian

-Bulgarian - Croatian

Only the numerical value and the alphabet can be retrieved, and a special character is a language

that cannot be retrieved:

-Romanian

Numerical value, alphabet, and language to which all special characters cannot be retrieved:

-Turkish

1.3 User Environment

1.3.1 Limitations(PDF Encrvyption)

0010-4825

Applications Required to View or Change Permissions of Encrypted PDF

Any PDF file that is generated by an iR device to which the Kit has been installed is prepared in keeping

with general PDF specifications. Not all viewer applications, however, support particular specifications

used by the iR device, not permitting browsing of the file. Furthermore, a viewer may not permit viewing

of PDF files of specific versions. An encryption PDF file is in keeping with the requirements of version

1.3 if its level of encryption is set to 40-bit RC4, while it is compatible with the requirements of version

1.4 if set to 128-bit RC4. (If not intended for transmission in encryption PDF, the PDF version will be 1.3.)

In a practical situation, a viewer will not be able to open a PDF file encrypted to 128-bit RC4 unless it

supports the applicable specifications whether or not it is designed to support encryption PDF in general.

EX:

Acrobat 4.0 supports up to 40-bit RC4, and thus is not capable of opening a PDF file encrypted to 128-bit

RC4, which requires Acrobat 5.0 or later. Third party applications call for specifications of their own, and

there is no guarantee that they will operate normally.

Attention:

If it is only encryption PDF inspection, even only Adobe Reader (It was Acrobat Reader ) is possible

inspection. When the authority option is changed, it is necessary to note it because Acrobat is needed.

Because the application made of 3rd Party must depend on the specification on the application side,

operation is unwarrantable.

1.3.2 Limitations(Serchable)

0010-4826

Use of Text in a Searchable PDF File

If the PDF viewer possesses a text search function, a search may be run within the transparent text in the

file. If the application is equipped with a PDF editing function (as is Adobe Acrobat), transparent text may

also be copied for pasting in a different application or turned into a text file. If Widows NT4.0/2000/XP/

Server 2003 is used, turning on the operating system's index service and installing the Adobe PDF Filter

will enable running of a search in the entire text of a PDF file.

Содержание DU7-1178-000



























































































































Результаты поиска

Содержание DU7-1178-000

Отзывы:

Canon DU7-1178-000, Руководство по обслуживанию, Страница: 109 / 122

Результаты поиска

Содержание DU7-1178-000

Отзывы: