8-26
Chapter 8 ISIS/TWAIN Driver Settings
[Single counter with number of characters]
abbreviation: <Cx>
A dialog box appears in which to specify the number of
characters of the single counter. A counter of the specified
number of characters will be imprinted or added on
scanned images.
[Double counter with number of characters]
abbreviation: <CxCx>
A dialog box appears in which to specify the number of
characters of the double counter. A counter of the specified
number of characters will be imprinted or added on
scanned images.
[Current time] abbreviation: <TIME>
Imprint/add the time of scanning using 8 digits in 24-hour
format.
[Date (Month/Day/Year)] abbreviation: <MDY>
Imprint/add the date of scanning using 10 digits in Month/
Day/Year format.
[Date (Day/Month/Year)] abbreviation: <DMY>
Imprint/add the date of scanning using 10 digits in Day/
Month/Year format.
[Date (Year/Month/Day)] abbreviation: <YMD>
Imprint/add the date of scanning using 10 digits in Year/
Month/Day/format.
[Up arrow] abbreviation: <U>
Imprint/add an up arrow ( ).
[Down arrow] abbreviation: <D>
Imprint/add a down arrow ( ).
[Left arrow] abbreviation: <L>
Imprint/add a left arrow (
).
[Right arrow] abbreviation: <R>
Imprint/add a right arrow ( ).
IMPORTANT
• Special text can only be entered for one type of counter. If you
enter two types of counter and click [OK], an error message is
displayed.
• A maximum of 32 characters can be imprinted or added, but
the number of characters you can enter may be limited by the
font size.
If the number of characters entered exceeds the limit, an error
message is displayed when you click [OK].
Horizontal Offset
Enter the distance from the left of the feeder inlet.
Vertical Offset
Enter the distance from the top edge of the page. (0" to
19.69") (0 to 500 mm)
Hint
The input range changes if Long Document Mode is enabled.
The input range is (0" to 39.37") (0 to 1000 mm) when Long
Document Mode is set to [ON1], and (0" to 118.11") (0 to
3000 mm) when it is set to [ON2].
