Canon DR 7550C - imageFORMULA - Document Scanner Скачать руководство пользователя

Страница: 24 / 68

• Note that scanning the following types of documents can

cause a paper jam or malfunction. To scan such a document,
make a photocopy of the document and then scan the
photocopy.

• To scan bound multi-page documents such as invoice

booklets, place the bound edge against the feeder inlet and
scan by manual feeding.

• To use the Long Document Mode, feed document pages

manually, one after another.

Document Feeder Capacity

DR-6050C:

Up to 300 sheets of good quality paper or up to 1.10"
(28 mm) high (maximum)

DR-7550C/9050C:

Up to 500 sheets of good quality paper or up to 1.89"
(48 mm) high (maximum)

IMPORTANT

Do not exceed the load limitation mark when placing documents
in the Document Feed Tray. It may cause paper jams.

Small Size Limitation Mark:
When placing documents that are smaller than LTR/A4 size.
Large Size Limitation Mark:
When placing documents that are larger than LTR/A4 size.

■

Long Document Mode Setting

Using the Long Document mode, pages up to 118.11"
(3 m) long can be scanned. You can set the Long
Document Mode setting from the User Mode.

Press the Menu key on the control panel.

The User Mode is activated.

Press the [

] key four times to display Long

Document Mode.

Wrinkled or creased
documents

Carbon paper

Curled documents

Coated paper

Torn documents

Extremely thin,
translucent paper

Documents with
paper clips or staples

Large Size
Limitation
Mark

Small Size
Limitation
Mark

Menu Key

Содержание DR 7550C - imageFORMULA - Document Scanner





































































Результаты поиска

Содержание DR 7550C - imageFORMULA - Document Scanner

Отзывы:

Похожие инструкции для DR 7550C - imageFORMULA - Document Scanner

Бренды по названию

Популярные бренды

Canon DR 7550C - imageFORMULA - Document Scanner, Справочное руководство

Результаты поиска

Содержание DR 7550C - imageFORMULA - Document Scanner

Отзывы:

Похожие инструкции для DR 7550C - imageFORMULA - Document Scanner

Бренды по названию

Популярные бренды