8-2
Chapter 8 ISIS/TWAIN Driver Settings
1.
Before Use
An application program that supports the ISIS or TWAIN driver is required to use the DR-7090C. The DR-7090C requires that it
be selected for use as a scanner. The supplied CapturePerfect 3.0 application uses the ISIS driver. This section describes how to
select the scanner using CapturePerfect 3.0 (an ISIS-compatible application program).
As the scanner selection procedure depends on the application program being used, refer to your application’s user’s manual as
needed to select the scanner.
IMPORTANT
• When the conditions for scanning require a large amount of the computer’s memory, scanning may not be possible if the memory is
insufficient. If a memory error appears during scanning, exit the application and change the scanning conditions before attempting to scan
again.
• Configurations that use the computer’s memory include the following. If memory becomes insufficient, consider changing these
configurations.
Hint
The Job Registration Tool is a TWAIN-compliant application dedicated to the DR-7090C, and requires no scanner selection.
1.
From the Windows task bar, click [Start]
➔
click [All
Programs]
➔
[CapturePerfect 3.0]
➔
[CapturePerfect
3.0].
CapturePerfect 3.0 starts.
