40
OSD Menu
Adjustment
This menu is used to adjust the image quality and perform calibration without a PC.
Item
Setting Options (underline indicates factory default)
Picture Mode
Select a preset mode. See
47 for each setting.
SMPTE-C
,
EBU
,
ITU-R BT.709
,
ITU-R BT.2020
,
Adobe RGB
,
DCI-P3
: Mode set to the
brightness, color temperature, gamma, and color gamut of the three primary colors chromaticity
points of each standard.
User 1-7
: Custom modes. Set each item of "Adjustment". You can change the mode name within
16 one-byte characters including alphabetical characters, numbers, and symbols.
Canon Log
: Canon Log is ideal when viewing image captured with CINEMA EOS SYSTEM camera/
video camera. Performs linear conversion and displays Canon Log video without having to import
Viewing LUT.
ACESproxy
: This mode is used to display ACESproxy (ACES 0.7/1.0) videos with the optimum
gamma and color gamut. The version of ACESproxy can be selected from "Compatible Settings"
under "System Settings".
Contrast
Adjusts the white level of the image. (Increments of 1)
0
to
2000
Brightness
Adjusts the black level of the image. (Increments of 1)
-500
to
500
Chroma
Adjusts the color saturation of the image (color depth). (Increments of 1)
0
to
2000
Sharpness
Adjusts the sharpness of the image. (Increments of 1)
0
to
100
Backlight Control
Switches the backlight control method.
Local Dimming (High, Middle, Low)
: Local dimming is a technology to control the amount of light
emitted by the backlight for each area. The backlight of bright area is increased and the dark area
is decreased according to the displayed content. Contrast increases as local dimming increases
("High").
Global Dimming
: Global dimming is the ability to control the amount of light emitted by the
backlight on the entire screen. If the image is dark, the whole display is darkened.
Off
: No backlight dimming.
Note
• When "Global Dimming" is selected, the contrast may change temporarily in order to maintain
gradation depending on the image. If this is undesirable, turn it "Off" and see if it improves.
Color Temperature
Sets the color temperature.
D93, D65, D61, D60, D56, D50, DCI-P3
: Select from preset color temperatures.
Gain R/G/B, Bias R/G/B
: Can be adjusted in increments of 1 when a preset color temperature is
selected.
Gain R/G/B: 0
to
1023
Bias R/G/B: -500
to
500
Custom (xy)
: You can adjust CIE x, y in increments of 0.001.
x: 0.260
to
0.360
y: 0.260
to
0.360
Note
• "Custom (xy)" and "Gain R/G/B" or "Bias R/G/B" cannot be selected at the same time.
• If "Custom (xy)" are modified after adjusting "Gain R/G/B" or "Bias R/G/B" then both these
values will return to factory default.
• When "Gain R/G/B" or "Bias R/G/B" value is adjusted, an asterisk "*" is displayed by color
temperature preset mode.
• The displayed color coordinates (x, y) are just a guide and not guaranteed absolute values.
