Copyright, 2010 ExpoImaging, Inc.
“Canon” and the Canon camera models listed are Trademarks of Canon, Inc.
ExpoDisc Custom White Balance Procedures
Canon Cameras
Canon Digital Rebel (300D) and Digital Rebel XT (350D)
1.
Install the ExpoDisc and set the camera to Manual Focus mode.
2.
Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes or set the correct manual exposure in “M” mode.
3.
Aim the camera towards the light illuminating the subject and press the
shutter release button.
4.
Push
ʻ
MENU
ʼ
button and select < camera icon > tab.
5.
Select
ʻ
CUSTOM WB
ʼ
using < down arrow >, then push the
ʻ
SET
ʼ
button.
6.
Push
ʻ
SET
ʼ
button again to select the ExpoDisc
ʻ
gray frame
ʼ
just taken.
7.
Push the
ʻ
MENU
ʼ
button to exit menu.
8.
Push and hold the
ʻ
WB
ʼ
button < down arrow > on the back of the camera
while rotating main dial on top of the camera to select the custom WB icon in
the control panel.
9.
Remove the ExpoDisc, return camera to Auto Focus if desired, and start
shooting.
Canon Digital Rebel XTi (400D)
1.
Install the ExpoDisc and set the camera to Manual Focus mode.
2.
Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes or set the correct manual exposure in “M” mode.
3.
Aim the camera towards the light illuminating the subject and press the
shutter release button.
4.
Push the
ʻ
MENU
ʼ
button.
5.
Scroll down to
ʻ
Custom WB
ʼ
in the menu using the thumb dial, then push the
ʻ
Set
ʼ
button in the center of the thumb dial.
6.
The camera will display a gray image representing the shot you just took
through the ExpoDisc. Press the
ʻ
Set
ʼ
button. You will see an orange
reminder if the camera is not already in Custom WB mode.
7.
Push the arrow/WB button until the custom WB icon (
) is selected. Press
the
ʻ
MENU
ʼ
button (or press the shutter halfway) to exit the menu and return
to the camera settings display.
8.
Remove the ExpoDisc, return the camera to Auto Focus if desired, and start
shooting.
