Canon DADF-P1, Руководство по обслуживанию

Страница: 60 / 90

Chapter 3
3-20
F-3-125
2) Disconnect the two sensor connectors [1].
3) Remove the harness from the harness guide [2].
4) Remove the screw [3], and remove the harness guide [2].
5) Remove the two screws [4], and then remove the metal plate [5].
6) Remove the four screws [6], and then remove the left hinge [7].
F-3-126
7) Remove the four screws [1], and then remove the metal plate.
F-3-127
8) Remove the timing belt [1].
F-3-128
3.4.9.8 Removing the Document Tray
0010-6660
1) Remove the screw [1] at the front of the machine, and then remove the tray
holder [2].
2) Remove the document tray [3].
F-3-129
3.4.9.9 Removing the Feeding Unit
0010-6665
1) Remove the two screws [1].
F-3-130
2) Remove the two screws [1], and then remove the feeding unit.
F-3-131
3.4.9.10 Removing the Platen Roller
0010-4051
1) Turn over the feeder unit.
2) Remove the resin ring [1], three gears [2], and one bearing [3].
[2] [1]
[6]
[7]
[4]
[5]
[3]
[1]
[2]
[6]
[1]
[1]
[1]
[1]
[1] [2]
[3]
[1]
[1]
[2]