Canon DADF-P1, Руководство по обслуживанию

Страница: 43 / 90

Chapter 3
3-3
F-3-12
3.3.2 Feed Motor
3.3.2.1 Removing the Rear Cover
0010-6191
1) Open the feeder cover.
2) Move to the back of the machine, remove the two screws [1], and then
detach the rear cover [2].
F-3-13
Remove the rear cover with the two claws [3] released.
3.3.2.2 Removing the Feed Motor
0010-3930
1) Disconnect the connector [1], and then remove the tension spring [2].
2) Remove the two screws [3], and then remove the feed motor [4] together
with the adjusting plate.
F-3-14
3.3.2.3 Installing the Feed Motor
0010-3931
1) Install the feed motor in such a manner that the motor pulley is engaged
with the timing belt, and then tighten two screws [1] temporarily.
2) Attach the tension spring [2] to the adjusting plate and motor base, and
then securely tighten the screws tightened temporarily in step 1.
3) Connect the connector [3].
F-3-15
3.3.3 Timing Belt/Pulley
3.3.3.1 Removing the Front Cover
0010-6195
1) Open the feeder cover [1], and then remove the screw [2].
F-3-16
2) Remove the two screws [3], and then detach the front cover [4].
F-3-17
3.3.3.2 Removing the Feeder Cover
0010-6194
1) Remove the screw [1] and positioning pin [2], and then detach the feeder
cover [3].
[2]
[3]
[4] [2]
[1]
[1]
[3]
[2]
[1] [4]
[2]
[3]
[3]
[2]
[1]
[1]
[2]
[3]
[4]