Canon DADF-N1, Руководство по обслуживанию

Страница: 151 / 199

Chapter 3
3-79
F-3-291
8) Remove the resin E-ring [21], pulley
[22], and belt [23]. Before removing the
pulley [24], you need to remove the
feeding unit.
F-3-292
Loosen the screw [26] of the tension
arm [25]; then, force the arm clockwise
to mount it. When you have attached the
timing belt [23], tighten the screw [26].
F-3-293
3.5.2.9 Removing the
Feeder Unit
0007-2843
1) Remove the screw [1], and pull out the
busing [2]; then, detach the original
pickup tray [3].
F-3-294
2) Remove the 2 screws [4] on the front
cover side; then, remove the locking
[17]
[19]
[19]
[18]
[18]
[18]
[16]
[20]
[22]
[21]
[24]
[23]
[23]
[25]
[26]
[3]
[1]
[2]