manualshive.com logo in svg

Canon CX-G2400, Руководство пользователя

Поделиться
Скачать
Canon CX-G2400 Скачать руководство пользователя страница 40

35

Configuring Print Settings

6

 Orientation

Specify the orientation of paper to print on.

9

[Check Settings]

Clicking this button allows to check the print 
settings registered in [Favorites].

On the displayed screen, clicking [Copy] allows 
you to copy the settings. To read the copied 
settings, paste them to the page of application 
software such as Notepad.

7

 [Defaults]

Clicking this button restores the default settings 
on the [Page Setup] tab.

8

[ Version  Information]

Check the information about the version and 
copyright of the printer driver by clicking this 
button.
On the displayed screen, clicking [Obtain Printer 
Information] displays the information of the 
currently connected printer

NOTE

•  When a paper type associated with Profile (the start character is "*") is selected, the [Color Correction], [Print the 

gradation smoothly] and [Brightness] cannot be adjusted.

Содержание CX-G2400



















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды