Canon CR-N300, Руководство по настройкам

Страница: 23 / 119

23
Configuration of the Settings Page
The configuration of the Settings Page is as follows:

Header
This area is common to all Settings Pages.
(1) Model Name
Displays the model name of the connected camera.
(2) Tally Lamp S tatus Display
Displays the video distribution status on the Tally Lamp.
: Distributing
: Preparing for distribution
: No distribution
(3) Power ON/ S tandby
Switches between the camera on and standby mode. Set it to standby mode if needing to stop HDMI/SD output
or IP distribution of videos.
If is clicked while the camera is on, "This will switch to standby. Do you want to continue?" message will
appear. Click [OK] and "On Standby" will appear in the video display area and will go into standby mode. Click
[Start Up] to return to the power on state.
The power lamp on the front of the camera is as follows:
On (green): Power on
ON (orange): Standby
Blinking (green): Changing to or from standby
(4) Menu
Click to display a list of items in the settings area.
For details of the items, refer to the "Settings Area" (P. 24).
(1) (2) (4)
(6)
(7)
(9) to (16)
Header
Video display/
operation area
S ettings area
(5)
(8)
(3)