Canon CP-300 Скачать руководство пользователя страница 187

Страница: 187 / 204

183

a C
omput

A Message is Coming Up

If a problem occurs during operation of or printing using product, an error message
will be displayed on the display. Read the message, and follow the corresponding
procedure.

Message

Details/Solution

Input value is out of the
acceptable range.

Enter a value within the setting range.

No data to paste.

Cut or copy the page and prepare the data to be
pasted.

Exceeding Memory
Capacity.

No more characters can
be entered.

There is insuffi

cient memory to input text.

(P.190)

Save the text data you have created, delete all text
displayed on the screen, and then enter new text.

Length exceeded.

Input data exceeds cut
length.

Enter a value within the setting range.

Numbering is already
set for this page.

The numbering can be set only once per page.

Exceeded character
limit.

Rework the fi le so that it fi ts within the number of
character that can be entered.

xxxxxxxx
already exists.

Change the folder
name.

Use a diff erent folder name.

Exceeding Memory
Capacity.

Excessive data are not
saved.

There is insuffi

cient memory to save the fi le. Increase

the free space by deleting unnecessary fi les.

No fi les.

There are no fi les saved in the printer.

Содержание CP-300













































































































































































































Результаты поиска

Содержание CP-300

Отзывы:

Canon CP-300, Руководство пользователя, Страница: 187 / 204

Результаты поиска

Содержание CP-300

Отзывы: