Canon CP-300 Скачать руководство пользователя страница 179

Страница: 179 / 204

175

a C
omput

What to Do in Case of Trouble

Problem

Cause/Things to Check

Solution

The power does not
turn on.

Check that the AC adapter
and power cord are
properly connected.

After confi rming that the
AC adapter and power cord
are connected, insert the
power plug fi rmly into the
power outlet.

Are you using the supplied
AC adapter (PR-TP001) and
power cord?

Do not use anything other
than the supplied AC
adapter (PR-TP001) and
power cord. Failure to do
so may result in fi re, electric
shock, or malfunction.

Are the batteries installed
in the wrong direction?

Make sure that all batteries
are installed correctly in the
direction marked on the
inside of the battery case.

Are the batteries low?

Replace the batteries or use
the included AC adapter
(PR-TP001).

Are batteries other than
the specifi ed ones being
used?

Use the specifi ed batteries.

(P.13)

The display does not
change to the AC
adapter symbol even
after the AC adapter
is loaded.

Check that the AC adapter
and power cord are
properly connected.

Turn off the power, make
sure the AC adapter and
power cord are connected,
and then insert the power
plug fi rmly into the power
outlet.

The remaining
battery charge is not
displayed correctly.

If you load batteries that
are not fully charged, the
remaining battery charge
may not be displayed
correctly.

Use fully charged batteries.

Содержание CP-300













































































































































































































Результаты поиска

Содержание CP-300

Отзывы:

Canon CP-300, Руководство пользователя, Страница: 179 / 204

Результаты поиска

Содержание CP-300

Отзывы: