Canon ColorWave 3800, Руководство по эксплуатации

Страница: 155 / 358

Optimize the print productivity
Introduction
When you load media, always make sure that you install and define the correct media type and
size on the printer. Depending on your needs, you can optimize the print productivity in various
ways.
When productivity with different media sizes is the most important requirement.
1 Load up to 6 media rolls on the printer with different media sizes and the same media
type.
2 Use the [Landscape] orientation to print a job on a media size that is one size bigger
than the media defined on the system. For example, D prints in landscape on E and C
prints in landscape on D. You are not required to cut the media by hand.
3 Use the [Long edge first] setting or the [Long edge first with additional 180° rotation]
on the user panel or WebTools Express to rotate the orientation automatically.
When productivity is the only important requirement.
1 Load and define two or more media rolls on the printer with the same media size and
the same media type.
NOTE
When roll 1 is empty, the printer switches automatically to roll 2.
When a specific roll number is set in the job, the behavior depends on the
setting [Roll empty: when a specific roll number is set].
Optimize the print productivity
Chapter 3 - Define your workflow with WebTools Express 155