Canon ColorWave 3800, Руководство по эксплуатации, Страница: 111 / 358

Create a new template
Introduction
Create a new template in WebTools Express.
NOTE
• Depending on the configuration, less or more settings are available.
• More or fewer settings will be shown depending on the selections made.
• Note that the templates on the user panel are ordered alphabetically. When you want to order
the templates to your preference, it is advised to use ascending numbers in front of the name
(01-02-03 etc.).
• Click on the home button on the user panel to update the templates.
Procedure
1.
Select the [Preferences] - [Fold] tab in WebTools Express for the fold template.
Select the [Preferences] - [Scan] tab in WebTools Express for the scan template.
2.
Click on [Create new] at the right hand side.
3.
Enter a [Name], recognizable for the user.
4.
Enter a [Description], a description of the settings used.
5.
For the fold template: Select a [Template source].
IMPORTANT
If available, it is advised to use the templates embedded in the folding device to get the
best results.
• Select [Custom template] when you want to define the fold settings yourself.
• Select [Template embedded in folding device] when you want to use a template that is
predefined in the folding device.
6.
Select the desired settings. For every individual setting, there is a tooltip available in the template
editor to give a short explanation.
For more information on the fold settings, see
Fold settings for custom fold templates
on
page 140 and
Fold settings for embedded fold templates
on page 143 .
7.
Click [Ok] to save the template or [Cancel] to reject your entries.
Create a new template
Chapter 3 - Define your workflow with WebTools Express 111