Canon ColorPass-Z7400, Руководство по настройке

Страница: 81 / 210

4
4-17 Network Setup options
If the ColorPASS is configured to enable more than one protocol, it automatically
switches to the correct protocol when it receives a print job.
The available network types, and the Setup areas that pertain to them, are summarized
in the following table.
T
O ACCESS
N
ETWORK
S
ETUP OPTIONS
1. Confirm that the network cable is connected to the ColorPASS.
During Network Setup, the ColorPASS queries the network for zones, servers, and
server-based queues. If you perform Network Setup without a connected and
functioning network, default settings are used that may not meet your needs.
2. Choose Network Setup from the main Setup menu.
3. Choose Port Setup from the Network Setup menu.
4. Choose Ethernet Setup from the Port Setup menu, and enter the appropriate settings.
5. When you have finished entering port settings, choose Exit Port Setup, and then
choose Protocol Setup.
6. Enter the appropriate settings for the protocol(s) you will use.
For this Network or
Connection Type
Use this
Port Setup
Use this
Protocol Setup
Use this
Service Setup
AppleTalk over Ethernet Ethernet Setup AppleTalk Setup AppleTalk printing (PAP) is
enabled automatically.
TCP/IP over Ethernet Ethernet Setup TCP/IP Setup: Ethernet Setup LPD Setup
Web Services Setup
Windows Setup
Port 9100 Setup
(Windows 2000/XP/Server
2003)
IPP Setup
(Windows 98/Me/2000/XP/
Server 2003)
IPX/SPX over Ethernet Ethernet Setup IPX/SPX Setup PServer Setup (NDS, Bindery,
or both)