6
6-1
Fiery WebTools
ColorPASS user software includes a variety of tools that allow you to track and manage
print jobs. Access to some tools is controlled by your site administrator, but other tools
are available to all users.
• The Command WorkStation, Fiery WebSpooler, and Fiery Spooler all provide the
capability to view and control the flow of print jobs to the ColorPASS. If the
administrator has set Administrator and Operator passwords in Setup, you need one
of these passwords to perform most Command WorkStation, Fiery WebSpooler, and
Fiery Spooler functions. For information on these tools and the access privileges
needed to use them, see the Job Management Guide.
• The Status and WebLink WebTools do not require any special access privileges. As
long as the administrator has enabled Web Services in Setup and has provided users
with the IP address of the ColorPASS, anyone can use these WebTools.
• Fiery Link, a utility designed to give you up-to-date status on print jobs and
connected ColorPASS servers, is also available to all users.
Fiery WebTools
Fiery WebTools reside on the ColorPASS’s hard disk drive but can be accessed over the
network from a variety of platforms. The ColorPASS has a home page that lets you
view server functions and manipulate jobs remotely. This chapter describes only the
Status and WebLink WebTools. For information on Fiery WebSpooler, see the Job
Management Guide. For information on the Installer WebTool, see Getting Started.
N
OTE
:
Fiery WebTools are not supported on Mac OS computers.
T
O
ACCESS
F
IERY
W
EB
T
OOLS
:
1.
Start up your Internet browser application.
See Getting Started for information about supported platforms and browsers.
2.
Enter the IP address or the DNS name of the ColorPASS.
Check with the operator or administrator for this information.
Chapter 6:
Tracking
and Managing
Print Jobs
