manualshive.com logo in svg

Canon Colorado M Series, Руководство по эксплуатации, Страница: 263 / 378

Поделиться
Скачать
Canon Colorado M Series Скачать руководство пользователя страница 263

Log in as a System administrator 

Introduction

The System administrator settings are password protected. You have to log in as System
administrator on the operator panel or in the settings editor to be able to change the system
administrator settings.

Before you begin

The default System administrator password is 71617000. It is highly recommended to change it
during system installation or immediately after. For more information, see 

Change the System

administrator password on page 268

.

Log in on the operator panel

1. On the operator panel, tap on the [System] icon on the right.
2. Tap on any of the tiles, for example on [Connectivity ].
3. Tap on the login icon at the top right of the window.

4. Fill in the password and tap on [Log in].

Log in on the settings editor

1. Open the settings editor.
2. Click on [Visitor] in the top right corner.
3. Click on [Log in], select System administrator as [user name] and fill in the [password].
4. Click on [Log in].

Or,
1. Open the settings editor.

Log in as a System administrator

Chapter 8 - Configure the network and security settings

263

Содержание Colorado M Series



























































































































































































































































































































































































Отзывы:

Нет отзывов