Canon Colorado 1630, Руководство по эксплуатации

Страница: 219 / 388

Replace the filters
Introduction
Your printer can be equipped with emission filters or an external exhaust. When the printer is
equipped with filters, these filters must be replaced regularly. You can replace the filters without
service assistance:
• The operator panel gives an orange warning when you can replace the filters.
• The operator panel gives a red warning when you must replace the filters. The printing process
is stopped until you have placed new filters.
Video:
Replace the filters
.
Before you begin
Use Colorado 1630 prescribed:
• Microflex gloves for handling ink
• Filters
NOTE
For information on the prescribed maintenance materials, see List of Colorado 1630
maintenance materials on page 255 .
CAUTION
Wear the prescribed gloves when contact with ink or maintenance materials is possible. Gloves
should always overlap sleeves. Follow the Safety Data Sheets (SDS) guidelines carefully in
order to ensure maximum safety.
Procedure
1.
On the operator panel tap on the [Tools] icon on the right.
2.
Tap on [Replace the filters].
3.
Tap on [Replace] and read the instructions..
4.
Put on the Colorado 1630 approved gloves.
5.
Open the top cover from the media input side.
6.
Locate the filters on the left.
7.
Carefully push the curing carriage to the right away from the filters.
Replace the filters
Chapter 6 - Maintain the system 219