Canon Color imageCLASS MF8580Cdw, Руководство по обслуживанию

Страница: 228 / 401

4
4
4-158
4-158
Disassembly/Assembly > Document exposure/feeder system > Removing the ADF Unit/Cop Reader Unit > Procedure
Disassembly/Assembly > Document exposure/feeder system > Removing the ADF Unit/Cop Reader Unit > Procedure
Removing the ADF Unit/Cop Reader Unit
■ Preparation
1) Remove the Right Cover. Refer to page 4-147.
2) Remove the Left Cover. Refer to page 4-144.
3) Remove the Rear Upper Cover. Refer to page 4-153
■
Procedure
CAUTION:
Be sure to perform "After replacing ADF unit (Refer to page 4-36)" and "After replacing
reader unit (Refer to page 4-37)" when replacing the ADF Unit and Reader Unit,
respectively.
1) Remove the claw [1] to remove the Reader Shaft Retainer [2].
2) While supporting the ADF Unit/Cop Reader Unit [3], remove the Reader Support
Shaft [4].
3) Bring down the Reader Support Shaft [4] to close the ADF Unit/Cop Reader Unit [3].
[3]
[4]
[1]
[2]
F-4-346
4) Remove the handle [1].
• 2 screws [2]
x2
[1]
[2]
5) Remove the Controller Cover [1].
• 7 screws [2]
• 2 hooks [3]
x7
[2]
[2]
[2]
[3]
[3]
[1]
F-4-347
F-4-348