Preparation for Protocol Settings
2-8
Spe
c
if
y
ing
the
Networ
k
Se
tti
ngs
2
5
Right-click the selected device
➞
click [Initial Settings] on the pop-
up menu.
6
In the [Initial Settings] dialog box, specify the following items
➞
click [Next].
[Subnet]:
If the computer on which NetSpot Device Installer runs is
connected to more than one network, select the subnet that the
desired device belongs to.
[Product Type]:
Select the product name of your machine. If the product name of
your printer is not displayed, select [imageCLASS MF8170].
7
Specify the TCP/IP protocol.
[IP Address Settings with]:
Select the method for setting the IP address.
•
[Manual Setting]: You need to set the IP address
manually. The IP address that you
enter in [IP Address] is assigned
to the network board.
•
[DHCP]:
The IP address is automatically
obtained via DHCP (a DHCP
server needs to be active on the
network).
[IP Address]:
Enter the IP address assigned to the network board.
[Gateway Address]:
Enter the gateway address used for the TCP/IP
network.
