Preparation for Protocol Settings
2-7
Spe
c
if
y
ing
the
Networ
k
Se
tti
ngs
2
3
Execute the applicable command below to set the IP address for
the network board.
ping
<IP Address>
-l 479
Input Example:
ping 172.20.88.125 -l 479
NOTE
•
The character “
-l
” is the alphabet letter “L.”
•
The Subnet Mask and Gateway Address are set as <0.0.0.0>.
The preparation for the machine’s protocol settings are complete.
Settings Using NetSpot Device Installer
The following is the procedure for specifying the settings using NetSpot Device
Installer.
1
Insert the CD-ROM supplied with the printer into the CD-ROM
drive.
2
Double-click the [My Computer] icon on the screen
➞
right-click
the CD-ROM drive icon
➞
click [Open] on the pop-up menu.
3
In the [NetSpot_Device_Installer] folder on the CD-ROM, run
[nsdi.exe].
4
From the list, select the device whose [Device Name] is the MAC
address of the printer with <Not Configured> displayed in [Status].
