Canon CLC5151, Руководство по отправке факсов

Страница: 398 / 476

Specifying Report Settings 12-8
12
Pr
inting C
o
mm
unic
ation Repor
ts
Fax TX Report
The Fax TX Report enables you to check whether documents were sent correctly to their
intended destinations. A Fax TX Report can be printed automatically after the documents are
sent. You can also set the machine to print a Fax TX Report only when a transmission error
occurs, and adjust the Fax TX Report setting to print the first part of the document as part of the
report to remind you of the document's contents.
NOTE
•
This mode is available only if the optional Super G3 FAX Board is installed.
•
If TX Report in Send under <Settings> in Report Settings (from the Additional Functions screen) is set
to 'For Error Only' or 'On', a Send TX Report is printed with the Fax TX Report.
•
For an example of a Fax TX Report, see "Fax TX Report/Fax Error TX Report," on p. 14-5.
1
Press
➞
[Report Settings]
➞
[Fax] under <Settings>
➞
[Fax TX Report].
2
Select [For Error Only], [On], or [Off].
●
If you select [For Error Only] or [On]:
❑
Select [On] or [Off] for <Report with TX Image>
➞
press [OK].
<Report with TX Image>:
●
If you select [Off]:
❑
Press [OK].
The Fax TX Report is not printed.
[On]: Part of the sent document is printed on the Fax TX Report.
[Off]: The contents of the sent document are not printed on the Fax TX Report.