Canon CLC5151, Справочное руководство

Страница: 307 / 524

MEAP Settings 6-33
6
Sy
stem M
anage
r Setting
s
MEAP Settings
You can print information about installed MEAP applications.
Use HTTP Server
Set Use HTTP to 'On' to access this machine from a Web browser, and utilize the installed
MEAP applications.
IMPORTANT
•
To access [User Management/Settings] from the SDL, set USE HTTP to 'On'.
•
To manage user information for the Local Device Authentication system of SSO, set USE HTTP to 'On'.
•
To change the SSO user authentication system to Domain Authentication, Domain Authenti
Local Device Authentication, or Local Device Authentication, set USE HTTP to 'On'.
•
To use the Remote UI, set USE HTTP to 'On'.
NOTE
•
Set Use HTTP to 'On' if HTTP is required for MEAP functions and MEAP applications. To use HTTP for
functions other than MEAP (e.g., the Remote UI), set Use HTTP in Network Settings (from the
Additional Functions screen) to 'On'. (See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
•
If you set Use HTTP in System Settings (from the Additional Functions screen) to 'On', the port number
for MEAP functions and MEAP applications is automatically set to '8000'.
1
Press
➞
[System Settings]
➞
[MEAP Settings]
➞
[Use HTTP].
2
Select [On] or [Off].
Details of each item are shown below.
●
If you select [On]:
❑
Select [On] or [Off] for <Use SSL>
➞
press [OK].
Use SSL (Secure Sockets Layer)
[On]: An HTTP server is used.
[Off]: An HTTP server is not used.
[On]: SSL is used to communicate.
[Off]: SSL is not used to communicate.