Specifying Common Settings
4-59
4
C
u
stom
izing Se
ttings
Data Compression Ratio for Remote Scans
You can set the compression ratio for network scanning. A high compression ratio reduces the
amount of memory used for scanning the document, but results in a lower image quality. On the
contrary, a low compression ratio increases the amount of memory used for scanning the
document, but results in a higher image quality.
NOTE
•
[Data Compression Ratio for Remote Scans] is displayed only if the optional Color Image Reader-E1 or
Color Image Reader-F1 is attached, and the printer function (standard-equipped for the iR C4580i/
iR C4080i) is installed.
•
For more information on the Network Scan function, see the Color Network ScanGear User's Guide.
1
Press
➞
[Common Settings]
➞
[Data Compression Ratio for
Remote Scans].
2
Select [High Ratio], [Normal], or [Low Ratio]
➞
press [OK].
Details of each item are shown below.
[High Ratio]: A small amount of memory is used for scanning the document, but the images
have a lower image quality.
[Normal]:
The amount of memory used for the document and the quality of the images are
moderate. The compression ratio is between the High Ratio and Low Ratio
settings.
[Low Ratio]: A large amount of memory is used for the document, but the images have a
higher image quality.
Содержание CLC5151
