Specifying Common Settings
4-38
4
C
u
stom
izing Se
ttings
2
Select [Low] or [High]
➞
press [OK].
Details of each item are shown below.
NOTE
If Energy Consumption in Sleep Mode is set to 'Low', it may take more than 10 seconds for the
touch panel to be displayed after pressing the control panel power switch.
Output Tray Designation
You can designate the machine's output trays to be used for specific functions.
The output trays indicated by Tray A, B, and C vary according to the attached optional
equipment.
NOTE
The same output tray can be designated for multiple functions.
[Low]: Energy consumption in the Sleep mode is low, but it takes longer to recover from the
Sleep mode.
[High]: Energy consumption in the Sleep mode is high, but it takes shorter to recover from the
Sleep mode.
Options Attached
Tray A/B/C
Optical finisher is not attached
Finisher-X1
Finisher-W1 or Saddle Finisher-W2
You can change the output tray indicated by Tray C by pressing
[Specify Tray C].
Содержание CLC5151
