manualshive.com logo in svg

Canon CanoScan 2700F, Начало работы

Поделиться
Скачать
Canon CanoScan 2700F Скачать руководство пользователя страница 15

15

2. Installing the SCSI Host Adapter Card

To install the SCSI host adapter card supplied with your Film Scanner into  your computer, ensure that you have
a Phillips screwdriver (+ shaped tip) at hand and follow the instructions provided below.

CAUTION:

• Your computer may require specialized tools. Consult with the vender of your computer or a qualified

technician if you are not sure about the required tools before attempting the installation.

 Turn off the computer’s power switch, disconnect the power cord and detach all

of the devices connected to your computer.

 Remove the computer case.

Refer to the instructions that accompanied the computer for the correct procedures to remove the com-
puter case.

 Remove the cover plate from the ISA bus slot in which you will install the SCSI

host adapter card.

 Carefully but firmly insert the SCSI host adapter card into the ISA bus slot.

Slot Cover Plate

CAUTION:
• Be careful not to lose the screw that at-

tached the cover plate to the slot. You will
need it to attach the SCSI host adapter card
to the slot.

CAUTION:
• Be careful to insert the SCSI host adapter

card straight into the slot. Avoid inserting it
at an angle.

Содержание CanoScan 2700F





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды