Canon C200B, Инструкция по эксплуатации

Страница: 118 / 236

Special Recording Modes
118
Continuous Recording
Once the continuous recording starts, the camcorder will keep recording continuously until you access the menu
to stop it. This will create a backup recording to make sure you do not miss any shooting opportunities. In this
mode, video and audio are recorded on both cards.
Use the menu to start/stop the continuous recording. While the continuous clip is being recorded on SD card B,
you can use the camera’s REC button to record ‘normal’ (non-continuous) clips as usual on SD card A. The
configuration of the continuous recording on SD card B is as follows.
Resolution: 1920x1080
Video format: MP4
Audio format: 4-channel linear PCM, 16 bit
* When continuous recording mode is activated and both cards are in recording standby, you can also press the REC button to
start recording on both cards.
Activating
1 Set the main recording format to [MP4 (SD Card)] (
A
64).
2 Open the [Recording Mode] submenu.
>
[
Æ
!
Recording/Media Setup]
>
[Recording Mode]
3 Select [Continuous Recording] and then press the joystick.
• The continuous recording mode is activated and [CONT STBY
'7
] appears at the top of the screen. The
normal recording indicator changes to [STBY
'6
].
Recording
1 Open the [Continuous Recording] submenu.
>
[
Æ
!
Recording/Media Setup]
>
[Continuous Recording]
2 Select [REC] and then press the joystick.
• The tally lamp illuminates and continuous recording starts on SD card B. [CONT STBY
'7
] changes to
[
Ü
CONT REC
'7
].
3 While recording continues on SD card B, you can use the REC button to record normal (non-continuous)
recordings on SD card A.
• Press the REC button to start recording on SD card A. [STBY
'6
] changes to [REC
'6
]. Press the REC
button again to stop recording only on SD card A.
• Alternatively, when both SD cards are in recording standby, you can press the REC button to begin
recording on both cards.
Operating modes:
SD card B
Set [Continuous
Recording] to [REC]
SD card A
Menu operation: Set [Continuous
Recording] to [STBY]
Continuous recording
Normal recording Normal recording
B only starts
A starts
Press the
REC button* Press the
REC button Press the
REC button
A only
stops
A only
starts
Recording stops on
both cards
REC button operation: