Canon AX-C4343W Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 86

background image

Parts names and functions

30

The battery pack supplies power to the detector during wireless connection. Be sure to
fully charge the battery before use.
Inserting the detector into the Docking Station lets you charge the battery pack in the
detector as well as configure the connection settings of the control system.
The battery charger is designed for the dedicated battery pack.
For details, refer to the user’s manuals for the battery pack, the Docking Station and the
battery charger.

When the detector is set in a bucky stand or table, the LED lamps on the detector are no
longer visible. However, the status indicator can be used to display the power and
exposure ready status indicated on the detector’s LED lamps. In addition, you can turn the
detector on and off by pressing the POWER switch on the status indicator, or switch the
detector to exposure ready status by pressing and holding the READY switch on the status
indicator. You can attach the status indicator in a place where it can be easily checked
during examination. For details, refer to the user’s manual for the Multi Box.

The ready indicator is connected to the image-capture computer via USB and is attached
using the hook-and-loop fastener in a place where it can be easily seen.
The LED lamps on the detector light up when the detector is in exposure ready status.
As the available image-capturing time (maximum 10 minutes) after the detector is changed
to exposure ready status, is reduced to 5 minutes remaining, 1 minute remaining and 10
seconds remaining, or when the X-rays are received by the detector, the detector beeps,
or the LED lamps on the detector light up or flash. The volume can be controlled or set to
mute.
This unit is used as an interface of the image-capture computer for infrared
communication with the detector, which registers the detector to the control system or the
laptop computer.

3.4

Battery pack / Docking Station /
Battery charger

3.5

Status indicator

3.6

Ready indicator

000_DIA-2019-019-E03_AX-C4343W.book Page 30 Friday, November 27, 2020 12:38 PM

«
...
28
29
30
31
32
...
»

Содержание AX-C4343W























































































Отзывы:

Нет отзывов

Похожие инструкции для AX-C4343W

Бренд: ZIGBEE Страницы: 4

Бренд: CAIRE Страницы: 38

Бренд: Caframo Страницы: 72

Бренд: EAW Страницы: 2

Бренд: abc Страницы: 28

FUSION APOLLO MS-WB675

Бренд: Garmin Страницы: 18

Бренд: Rapid Shape Страницы: 12

MultiFill 003-561-005

Бренд: Hanskamp Страницы: 20

Бренд: MAGSTIM Страницы: 86

Бренд: Eleiko Страницы: 4

Бренд: Heiniger Страницы: 164

Бренд: Hausmann Страницы: 10

Бренд: Carbatec Страницы: 29

Бренд: PurAthletics Страницы: 2

Бренд: CDP Страницы: 20

Showlite LDO-10 LED DMX Operator

Бренд: Musikhaus Kirstein Страницы: 6

Бренд: Mgl Страницы: 2

Бренд: SystemRoMedic Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды