Canon Arizona 135 GT Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 234

Canon Arizona 135 GT Скачать руководство пользователя страница 10

Notes for the reader

Typography

This manual uses the following typography to indicate elements that are part of the user
interface.

Typography

Indicates

[Text between square brackets]

Name of a button, tile, setting, value, or other
option of the user interface

<Text between angle brackets>

• Name of a key on a keyboard
• Name of a variable: item that varies accord-

ing to the context

Text displayed in courier font

• File path
• Command Prompt comment

[Text]

→

[displayed in]

→

[menucascade]

Names of options to be used in a fixed order

Safety symbols

Before you use this product, make sure you read and understand the safety information that
belongs to the product. Find the safety information on

"http://downloads.cpp.canon"

to follow all warnings and instructions marked on the product.

This manual uses the following safety symbols to indicate hazards and precautions.

Symbol

Type of symbol

Indicates

WARNING

Indicates a warning concerning operations that may lead to
death or injury to persons if not performed correctly. To use
the machine safely, always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.
This indication can concern hazards that have a specific CAU-
TION symbol. The 'hot surface', 'electric shock', 'moving
parts' and 'laser beam' cautions are listed below.

CAUTION

Hot surface

Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.

CAUTION

Electric shock

Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.

CAUTION

Moving parts

Indicates a caution concerning operations that may lead to in-
jury to persons if not performed correctly. To use the ma-
chine safely, always pay attention to these cautions.

4

Notes for the reader

10

Chapter 1 - Introduction

«
...
8
9
10
11
12
...
»

Содержание Arizona 135 GT











































































































































































































































Отзывы:

Нет отзывов