Canon 9867A006, Основное руководство

Страница: 61 / 139

Making Copies 5-2
Co
p
y
in
g
5
Making Copies
NOTE
•
When making copies on LTR-size paper after having continuously copied on paper
smaller than LTR-size paper, the copies may be dirty. To prevent copies from being dirty,
wait about 1 minute before making copies.
•
When making copies of a small size or heavy paper
*
, etc., the copy speed may be
slightly slower than usual.
*
The paper type should be selected in the Menu. (See “Specifying the Paper Type,” on p.
2-11.)
•
If you intend to make a copy and print with a thermal transfer printer using the same
sheet of paper, make the copy first. Failure to do so may make copies dirty or cause a
paper jam.
•
When copying onto transparencies, remove each transparency from the output tray as it
is output.
1
Place the document on the platen glass or load it in the ADF.
For details on how to place documents, see “Setting Up Documents,” on p. 3-3.
2
Press [COPY].
3
Use the numeric keys to enter the number of copies.
You can set up to 99 copies.
4
Adjust any necessary settings for your document.
•
Specify the size and the type of the paper you load in the cassette or the
multi-purpose feeder. (See “Specifying the Paper Size and Type (Common for
Cassette and Multi-Purpose Feeder),” on p. 2-10.)
•
Press [Image Quality] to select the scanning resolution. (See “Adjusting the Image
Quality (Resolution),” on p. 5-6.)
•
Press [Exposure] to select the scanning exposure. (See “Adjusting the Exposure
(Density),” on p. 5-6.)
•
Press [Enlarge / Reduce] to select the copy ratio. (See “Setting Enlarging/Reducing,”
on p. 5-4.)
•
Press [Collate / 2on1] to perform the collate copy or 2 on 1 copy function. (See
“Special Features,” on p. 5-8.)