33
When using the double feed detection ignore function
If a document double feed is detected during scanning, document
feeding stops when the double fed documents are ejected. The
following error code is displayed in the Job No. Indicator of the
operating panel, and the DFR button lights.
Also, the [Rapid Recovery System] screen appears to enable you to
specify whether to continue scanning.
Detecting Skewed Documents
This scanner includes a function that can detect when a document has
been fed at a slant. When this function is used, the scanner will stop a
scanning operation automatically when it detects a skewed document
that exceeds a fixed angle, thereby preventing damage to the
document. In addition to skewed documents, this function also detects
stapled documents.
This function is useful for documents that are 170 mm (6.7") or larger
in width.
To use the skew detection function, open the scanner driver settings
screen and enable the skew detection function beforehand.
Setting procedure
1
Start CapturePerfect.
2
Open the scanner driver settings screen.
3
Click the [Feeding] tab.
Double feed detection error code
Buttons of
[Rapid Recovery
System] Screen
Buttons of
Operating
Panel
Description
[SAVE &
CONTINUE]
DFR button
Saves the preview image as a
scanned image and scans the
rest of the document.
[STOP]
Stop button
Discards the preview image and
stops scanning.
[DISCARD &
CONTINUE]
Start button
Discards the preview image and
continues scanning. Place the
double fed document again
before clicking this button.
