background image

3

 Manual Sensor Cleaning

N

154

 

While cleaning the sensor, never do any of the following. If the 
power is cut off, the shutter will close and the shutter curtains and 
image sensor might get damaged.
• Setting the power switch to <

2

>.

• Opening the battery compartment cover.
• Opening the card slot cover.

 

The surface of the image sensor is extremely delicate. Clean the sensor 
with care.

 

Use a plain blower without any brush attached. A brush can scratch the 
sensor.

 

Do not insert the blower tip inside the camera beyond the lens mount. If 
the power is turned off, the shutter will close and the shutter curtains or 
reflex mirror might get damaged.

 

Never use canned air or gas to clean the sensor. The blowing force can 
damage the sensor or the spray gas can freeze on the sensor.

 

If smear that cannot be removed with a blower remains, having the 
sensor cleaned by a Canon Service Center is recommended.

COP

Y

Содержание 4462B005





































































































































































































































































Отзывы: