4-11
Chapter 4 Other Functions
■
Continuous Manual Feeding Mode Setting
This mode disables automatic feeding by the pickup roller,
so that the loaded document stack must be fed by hand one
sheet at a time by the operator.
ON:
The pickup roller is disabled.
OFF:
Documents are fed by the pickup roller.
■
Stand-by Mode Setting
Selects the amount of time (240, 60 or 10 minutes) from
when the scanner is last used to when the Stand-by mode
is activated.
■
Display Language Setting
Selects English, Japanese or French for the language to
display on the control panel.
EN:
English display panel
JP:
Japanese display panel
FR:
French display panel
■
Display Contrast Adjustment
Use to adjust display panel contrast.
■
SCSI Speed Setting
Selects the scanner’s SCSI transfer speed.
If the scanner does not operate normally with the default
[20] (20 MBytes/s) speed, change this setting to reduce the
speed to [10] (10 MBytes/s) or [5] (5 MBytes/s).
■
USB Short Packet Setting
If the scanner does not operate normally when using the
USB interface, change this setting to [OFF].
■
Tray Position Setting
The document feed tray should be set to fit the number of
document sheets to be loaded.
Document Feed Tray” on p. 3-6.)
For the DR-6050C
0:
Up to 300 sheets
1:
Up to 100 sheets
For the DR-7550C/9050C
0:
Up to 500 sheets
1:
Up to 300 sheets
2:
Up to 100 sheets
