Canon 3211B001 - PowerShot E1 Digital Camera, Руководство пользователя

Страница: 83 / 148

83
You can select a chosen face to focus on and then shoot.
Set the Face Select mode.
●
Point the camera towards the face and
press the
0 button.
X
The Face Select mode will activate and a
white face frame (
) will display around
the face the camera will focus on. Even if
the subject moves, the frame will follow
the subject within a certain range.
Select a face you wish to focus on.
●
Press the
0
button, and a face frame will
move to the face you wish to focus on. If
the frame has moved to all detected faces,
the Face Select mode will be canceled.
●
Holding down the 0 button will display
face frames (up to 35) of all the detected
faces (green: the face the camera will
focus on, white: detected faces).
Shoot.
●
Press the shutter button halfway. The face
frame of the focused face will change into
and appears in green.
●
Press the shutter button all the way to shoot.
0 Selecting the Face to Focus On
(Face Select and Track)
Face Frame
In the following cases, the Face Select mode will be canceled.
•
When turning the power off and back on or changing the shooting mode.
•
When displaying the Menu screen.
•
When using the digital zoom or digital tele-converter.
•
When changing the recording pixels to .
•
When the screen is turned off (p. 45).
•
When the camera cannot detect any face.
(EC255) CDP-E065_Guide_E.book Page 83 Friday, July 4, 2008 10:35 AM
COP
Y