Canon 3114C008 Скачать руководство пользователя страница 395

Страница: 395 / 480

Printouts Are Blank/Blurry or Fuzzy/Inaccurate or Bleeding Colors/
Streaks or Lines

Although some air may enter the ink tube, it is not a malfunction. No problem if the nozzle check pattern is
printed correctly.

Check1

Make sure joint button is not lifted up.

Push the print head locking cover to make sure the print heads are installed properly.

Next, push the joint buttons firmly to the end.

Check Installation of Print Head

Important

• Remove the orange label and the protective tape of the print head to install it.

Check2

Check paper and print quality settings.

Printout Results Are Unsatisfactory

Check3

Are the print head nozzles clogged?

Print the nozzle check pattern and make sure that the ink is coming out normally.

For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see

If Printing

Is Faint or Uneven

Step1

Print the nozzle check pattern.

After printing the nozzle check pattern, examine the pattern.

• From the printer

Printing the Nozzle Check Pattern

• From the computer

◦

For Windows:

Printing a Nozzle Check Pattern

395

Содержание 3114C008

































































































































































































































































































































































































































































































Результаты поиска

Содержание 3114C008

Отзывы:

Canon 3114C008, Онлайн-руководство, Страница: 395 / 480

Результаты поиска

Содержание 3114C008

Отзывы: