Canon 3114C008 Скачать руководство пользователя страница 390 | Manualshive

Страница: 390 / 480

Canon 3114C008 Скачать руководство пользователя страница 390

Printer Does Not Pick up or Feed the Paper/"No Paper" Error

Check1

Make sure paper is loaded.

Check2

When loading paper, consider the following.

• When loading two or more sheets of paper, align the edges of the sheets before loading the paper.

• When loading two or more sheets of paper, make sure the paper stack does not exceed the paper load

limit.

However, paper may not feed correctly at the maximum capacity, depending on the type of paper or
environmental conditions (very high or low temperature and humidity). In such cases, reduce the amount of
paper you load at a time to less than half of the paper load limit.

• Always load the paper in portrait orientation, regardless of the printing orientation.

• When you load the paper on the rear tray, place the print side facing UP and align the right and left paper

guides with the paper stack.

• In the cassette, be sure to load only plain paper.

• When you load the paper on the cassette, place the print side facing DOWN and align the right/left/front

paper guides with the paper stack.

Check3

Is paper too thick or curled?

Unsupported Media Types

Check4

When loading envelopes, consider the following.

When printing on envelopes, see

Loading Envelopes in Rear Tray

, and prepare the envelopes before printing.

Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in
landscape orientation, they will not feed properly.

Check5

Make sure media type and paper size settings match with loaded paper.

Check6

Make sure that there are not any foreign objects in the rear tray.

390

«
...
388
389
390
391
392
...
»

Содержание 3114C008

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов