45
Proje
cti
ng
an
Im
age
Setting Up the Screen Automatically
Auto Setup
The auto setup function automatically makes the following settings and adjustments.
Use the auto setup function when:
• You turned the power on and the countdown sequence was completed.
• You changed the position or angle of the projector during the projection process.
Setting image input signal (Auto input)
Focusing (Auto focus)
Keystone correction (Auto keystone)
Screen color correction (Auto screen color correction)
• The auto screen color correction is disabled at the factory. To enable the auto screen color
correction when performing the auto setup, select the function in menu. (
• You cannot set a digital PC signal or an AV equipment signal ([Digital PC] and [HDMI])
with the auto setup function. Select the appropriate signal by pressing the
INPUT
button.
(
)
• When "No signal" message appears, press the
INPUT
button to select an appropriate
• If focusing, keystone distortion and/or screen color correction have not been performed
properly, manually adjust them. (Adjusting the focus:
, Correcting keystone distortion:
and Correcting the screen color:
)
• If you select [16:9 D. image shift] for [Screen aspect], [Auto setup] will be disabled and
the following screen appears.
• When you press the
INPUT
button and then the
AUTO SET
button, only the input signal
type is set.
• When you press the
FOCUS
button and then the
AUTO SET
button, only the focus is
adjusted.
• When you press the
D.SHIFT/KEYSTONE
button and then the
AUTO SET
button, only the
keystone distortion is adjusted.
