Canon 2503C002, Руководство пользователя

Страница: 145 / 211

145
Menu Description
Men
u
Gu
ide
Men
u
De
scr
iption
Audio in terminal select
> [System settings] >
[Audio in terminal select]
Select the terminal for audio input used with various input signals.
Remote control channel
Separate channels can be assigned to up to four projectors so that a single remote control
can be used with each projector.
Selecting the Projector Channel
If a wired remote control is used, there is no need to set the remote control channel.
Option Function
Ch1
Select the remote control channel to use with this projector.
Ch2
Ch3
Ch4
Independent
Can be controlled from a remote control set to any channel.
Selecting a Channel on the Remote Control
After changing the projector channel from the menu, always change the remote control
channel accordingly.
Ch1 Hold down both the Ch button and [1] button for 3 seconds.
Ch2 Hold down both the Ch button and [2] button for 3 seconds.
Ch3 Hold down both the Ch button and [3] button for 3 seconds.
Ch4 Hold down both the Ch button and [4] button for 3 seconds.
Independent Hold down both the Ch button and [0] button for 3 seconds.
[INPUT A-C] button settings
Select input signals to assign to INPUT A-C buttons on the remote control. This enables
direct selection of the input signals.
Option Function
INPUT A
Choose from the following input signals to assign: [Disable], [HDMI-1],
[HDMI-2] or [HDBaseT].
INPUT B
INPUT C
Submenu Function
HDMI-1
Select the terminal for audio input.
HDMI-2
HDBaseT
Option Function
Off No audio is output.
HDMI-1 Use HDMI-1 audio signals for audio output.
HDMI-2 Use HDMI-2 audio signals for audio output.
HDBaseT Use HDBaseT audio signals for audio output.