Additional Information
78
[POWER SAVE]:
In order to save power when the camcorder is powered by a battery
pack, it will automatically shut off if left without any operation for 5 minutes. Approximately
30 seconds before the camcorder shuts off, the message “
AUTO POWER OFF” will
appear.
[FILE NOS.]:
Select the image numbering method to be used when you insert a new
memory card.
Images are automatically assigned consecutive image numbers from 0101 to 9900, and
stored in folders containing up to 100 images. Folders are numbered from 101 to 998.
[
RESET]: Image numbers will restart from 101-0101 every time you insert a new
memory card.
[
CONTINUOUS]: Image numbers will continue from the number following that of the
last image recorded with the camcorder.
• If the memory card you insert already contains an image with a larger number, a new
image will be assigned a number one higher than that of the last image on the memory
card.
• We recommend using the [
CONTINUOUS] setting.
[FIRMWARE]:
You can verify the current version of the camcorder’s firmware. This menu
option is usually grayed out.
Date/Time Setup
DATE/TIME SETUP
[DATE FORMAT]:
Changes the date format for on-screen displays and for date printing.
Menu item
Setting options
CAMERA
PLAY
[T.ZONE DST]
List of world time zones.
z
z
z
z
[DATE/TIME]
–
z
z
z
z
[DATE FORMAT]
[Y.M.D (2008.1.1 AM 12:00)],
[M.D,Y (JAN. 1, 2008 12:00 AM)]
,
[D.M.Y (1.JAN.2008 12:00 AM)]
z
z
z
z
–
CO
PY
