1
2
3
4
5
6
7
8
9
Back
Next
Previous
TOP
3-33
Before Using the
Machine
Document and Paper
Sending and
Receiving
Copying
Printing
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Relay
Relay enables you to send a document to a remote machine (relay
station), which in turn sends the document to other destinations.
(The remote machine needs to have the relay feature.) How the
document is handled after it reaches the relay station depends on
what function is registered in the station’s subaddress.
1.
Set
documents.
2.
Press
[Add.Mode].
3.
Press
[
] or [
] to select <RELAY>, then press
[OK].
4.
Use the numeric keys, one-touch speed dialing
key, coded speed dialing, or [Address Book] key
to specify the relay station, then press [OK].
5.
Use the numeric keys to enter the relay station’s
subaddress (up to 20 digits), then press [OK].
S U B A D D R E S = 1 2 3 4 _
Ex.
■
6.
Use the numeric keys to enter the password (up
to 20 digits).
If no password is required, press [Start].
P A S S W O R D = 5 6 7 8 _
Ex.
7.
Press
[Start].
