Canon 2213C002, Инструкция по эксплуатации, Страница: 84 / 183

Recording Audio
84
Connecting an External Microphone or External Audio Input Source to the Camcorder
To each of the INPUT terminals you can attach commercially available microphones or analog line-in sources
with an XLR connector. To the MIC terminal you can attach commercially available condenser microphones with
their own power supply, and a
∅
3.5 mm stereo mini plug. To use the INPUT terminals and microphone holder,
the handle unit must be correctly attached to the camcorder.
Follow the procedure below to attach a microphone (refer also to the following illustration). To connect an
external device to the camcorder, plug the device’s cable into the desired INPUT terminal (
햵
).
1 Loo s en the microphone loc k s crew (
햲
), open the microphone holder and in s ert the microphone (
햳
).
2 Tighten the loc k s crew and put the microphone cable through the microphone cable clamp under
the microphone holder (
햴
).
3 Plug the microphone cable into the de s ired INPUT terminal (
햵
) or the MIC terminal (
햶
).
NOTES NOTES
• When using an external microphone, if you use the built-in Wi-Fi functions while recording, noise may be
recorded due to interference from the wireless communication. As much as possible, keep external
microphones away from the camcorder while recording.
햲
햳
햴
햵
햶
Microphone lock screw
Cable clamp
INPUT 2 / INPUT 1 terminals
MIC terminal