manualshive.com logo in svg

Canon 2207C025, Руководство пользователя

Поделиться
Скачать
Canon 2207C025 Скачать руководство пользователя страница 304

Notice

2357-062

◼

IPv6 Ready Logo

  The protocol stack included in this machine has obtained the IPv6 Ready Logo Phase-1

established by the IPv6 Forum.

◼

Product Information required by COMMISSION REGULATION (EU) No 801/2013 amending
Regulation (EC) No 1275/2008

Power consumption of the product in networked standby if wired network ports are connected and all wireless

network ports are activated (if they are available at the same time).

Model Name

Power consumption of the product in networked standby

LBP113w

3.0 W or less

●

The above value(s) are the actual values for single machine, chosen arbitrarily, and may therefore vary from
the value of the machine in use. Optional network ports are not connected and/or activated in the
measurement.

◼

WEEE and Battery Directives

Only for European Union and EEA (Norway, Iceland and Liechtenstein)

These symbols indicate that this product is not to be disposed of with your household waste, according to the WEEE

Directive (2012/19/EU), the Battery Directive (2006/66/EC) and/or national legislation implementing those Directives.

If a chemical symbol is printed beneath the symbol shown above, in accordance with the Battery Directive, this

indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a

concentration above an applicable threshold specified in the Battery Directive.

This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when

you buy a new similar product or to an authorized collection site for recycling waste electrical and electronic

equipment (EEE) and batteries and accumulators. Improper handling of this type of waste could have a possible

impact on the environment and human health due to potentially hazardous substances that are generally associated

with EEE. Your cooperation in the correct disposal of this product will contribute to the effective usage of natural

resources.

For more information about the recycling of this product, please contact your local city office, waste authority,

approved scheme or your household waste disposal service or visit www.canon-europe.com/weee, or www.canon-

europe.com/battery.

Appendix

299

Содержание 2207C025












































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды