Canon 1750, Руководство по копированию, Страница: 97 / 106

Placing Orientations of Originals 5-2
App
end
ix
5
Placing Orientations of Originals
This section describes the orientations of your originals when you place them on
the platen glass or in the feeder. Make sure that your originals are placed in the
proper orientation to achieve outputs in the desired image orientation.
IMPORTANT
•
On some copy modes such as 2-Sided, the orientation of the originals must be
specified in the (optional) setting procedure. Be sure to match the setting and the
orientation of the placed originals.
•
Place originals such as STMT horizontally, even if the scanning area of the platen
glass or feeder fully covers the size of vertically-placed originals.
Placing One-Sided Originals
The orientation types of originals are as follows:
•
Portrait:
•
Landscape:
Portrait refers to an original in vertical orientation: the
shorter edges are at the top and bottom of the
original.
Landscape refers to an original in horizontal
orientation: the shorter edges are at the left and right
of the original.