Canon 1730, Руководство по обслуживанию

Страница: 259 / 358

8
8
8-10
8-10
Service Mode > Details of Service Mode > #SSSW > Details
Service Mode > Details of Service Mode > #SSSW > Details
Detailed Discussions of Bit 1
For reception, the length of time during which the absence of the carrier is detected between
DCS and TCF may be set. This bit is valid when ‘1’ is set to bit 0 of #1 SSSW SW18.
Detailed Discussions of Bit 2
You can change the parameter relating to communication control for IP network (SSSW-SW02
bit4) to the existing control in a batch process. The parameter value is handled as a fixed
value.
● SSSW-SW22
List of Functions
Bit Function 1 0
0 To disable NSX transmission. Yes No
1 not used - -
2 not used - -
3 Prohibit manual polling Yes No
4 not used - -
5 not used - -
6 not used - -
7 not used - -
Detailed Discussions of Bit 0
Nonstandard protocol (own company mode) can be disabled.
Detailed Discussions of Bit 3
Selects whether to prohibit by manual polling (off hook key + start key).
●
SSSW-SW25
List of Functions
Bit Function 1 0
0
Transmission telephone numbers displayed on reports from
CSI
Other fax
number
Called number
1 not used - -
2 If void CSI has been received, handle as non-received CSI.Yes No
3 Menu display of message language Display Do not display
4 not used - -
5 not used - -
6 not used - -
7 not used - -
T-8-17
T-8-18
Detailed Discussions of Bit 0
Selects the transmission telephone number displayed on reports after the completion of
transmission.
When “Called number” is selected, the telephone number the fax called is displayed on
reports.
When “Other fax number” is selected, the telephone number sent from the other fax (the CSI
signal data) is displayed on reports.
Detailed Discussions of Bit 2
At "1" on this Bit, ignore the void CSI if received and if the dial has been made at this point,
the dialed number will be indicated on the LCD/ Report screen.
At "0" on this Bit, even though the dialed number is acknowledged, LCD/Report screen will
indicate nothing.
Detailed Discussions of Bit 3
When “Display” is selected, adds a Message Language menu to the user data “System
Setting”. This allows selecting different languages which to show displays and reports.
● SSSW-SW28
List of Functions
Bit Function 1 0
0 Caller V.8 protocol No Yes
1 Called party V.8 protocol No Yes
2 Caller V.8 protocol late start No Yes
3 Called party V.8 protocol late start No Yes
4 V.34 reception fallback Prohibited Not prohibited
5 V.34 transmission fallback Prohibited Not prohibited
6 not used - -
7 not used - -
Detailed Discussions of Bit 0
Select whether to use the V.8 protocol when calling. If NO is selected, the V.8 protocol is
inhibited at calling and the V.21 protocol is used
Detailed Discussions of Bit 1
Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is
inhibited when called and the V.21 protocol is used.
T-8-19